Closed now · Summer ⁦08:00–18:00⁩ · Winter ⁦08:00–17:00⁩ 0242 322 15 77 [email protected]
Print Guide

What Is Thermal Lamination? Matt, Gloss and Soft-Touch Compared

What thermal lamination is, how matt, gloss and soft-touch films differ, and which one to choose for business cards, menus, catalogues and more.

Thermal lamination is a thin, clear plastic film bonded to the surface of a printed sheet with heat and pressure. It protects the print from rubbing, moisture, stains and wear, and gives the surface a matt, gloss or velvety (soft-touch) finish. It's used on everything from business cards and menus to catalogue covers and packaging to improve both durability and perceived quality.

How is thermal lamination applied?

Thermal laminating film comes on a roll with a heat-activated adhesive on one side. Printed sheets pass through heated rollers together with the film; the heat melts the adhesive and the pressure presses the film evenly onto the paper, creating a smooth, bubble-free bond.

Lamination is applied after printing, once the ink is completely dry. It can be applied to one side or both. Trimming, creasing and folding are usually done after lamination.

Is lamination the same as encapsulation?

The terms are often confused. In print, “lamination” usually means a thin film applied to the surface of the paper, which still flexes and folds like paper. “Encapsulation” (often also loosely called laminating) seals the document between two thicker films with sealed edges, giving a rigid, more water-resistant result. Which one suits the job depends on how it will be used.

Matt lamination

Matt lamination diffuses light and removes glare. The surface looks silky and calm; colours soften slightly and contrast drops a little. It's a popular choice for corporate, elegant and minimalist designs.

  • Pros: no glare, so it reads well in any light; fingerprints show less than on gloss; creates excellent contrast with spot UV varnish.
  • Watch out for: scuff marks can show on dark backgrounds; consider this early for very dark designs.
  • Good for: corporate business cards, catalogue covers, corporate brochures, invitations.

Gloss lamination

Gloss lamination gives the surface a glass-like shine. Colours look more saturated and vivid, and blacks deeper. It makes images stand out in photo-led work.

  • Pros: vivid colours, an easy-to-wipe surface, good protection against moisture and stains.
  • Watch out for: it can reflect under strong light and make reading harder; fingerprints can be noticeable.
  • Good for: catalogue covers with product photos, menus, posters and photo promo cards.

Soft-touch (velvet) lamination

Soft-touch lamination feels soft to the touch, like velvet or peach skin. Visually it resembles matt, but the real difference is in the hand. On items that change hands, like business cards, the recipient is almost certain to notice.

  • Pros: a premium tactile experience; strong contrast when combined with foil or spot varnish.
  • Watch out for: it can cost more than matt or gloss; on surfaces touched often, shine and marks can develop over time.
  • Good for: premium business cards, luxury product boxes, special invitations, boutique hotel and brand catalogues.

Lamination types compared

FeatureMattGlossSoft-touch
LookGlare-free, silkyShiny, glass-likeMatt, soft
Effect on colourSlightly softensIntensifiesSlightly softens
FeelSmoothSlickVelvety
ReadabilityGood in any lightGlare in strong lightGood in any light
Best forCorporate itemsPhoto-led itemsPremium items

Why lamination matters in Antalya

Printed items used in Antalya's restaurants and hotels face tough conditions. High summer humidity, pool and beach use, direct sun on terraces and frequent cleaning wear out unlaminated paper quickly.

Lamination protects paper from moisture and spills and lets you wipe the surface with a cloth. But laminated paper is not fully waterproof; it can absorb moisture at the edges. For menus used in constantly wet conditions, thick encapsulation with sealed edges or synthetic materials may be a better fit. We can look at this together when planning your menu printing.

Finishes used with lamination

Lamination makes a good base for other finishes. The most common combinations are:

  • Matt lamination + spot UV: the logo or pattern is glossy while the background stays matt, creating clear contrast when it catches the light.
  • Soft-touch + foil: metallic gold or silver details on a velvety base for a luxurious effect.
  • Lamination + embossing: a raised logo adds a tactile accent.

If a laminated piece will be folded, the film stretches along the fold line. On heavier papers, the sheet must be creased before folding; otherwise the fold can crack or the film can lift.

Which lamination should you choose?

  1. Is your design photo-led with vivid colours? Gloss lamination.
  2. Do you want a corporate, clean result that reads in any light? Matt lamination.
  3. Does the way your product feels in the hand matter? Soft-touch lamination.
  4. Will people write on it? Most pens struggle on laminated surfaces; consider leaving that side unlaminated.

Practical questions about laminated products

Does lamination change the colour?

Although the film is clear, it affects how colour is perceived. Gloss film makes colours look more saturated and darker, while matt and soft-touch add a slight haze that softens tones. For jobs where brand colours are critical, it helps to see the laminated result on a proof.

One side or both?

For items where both sides are used, like business cards and menus, laminating both sides keeps the sheet balanced. Thin paper laminated on one side only can curl slightly because film and paper expand differently. Catalogue covers are usually laminated on the outside only.

Can laminated products be recycled?

Because lamination is a plastic film, it can make paper harder to recycle. For environmentally sensitive projects, consider alternatives such as varnish, or coating only the surfaces that need it.

Lamination vs varnish

Lamination and varnish are two protective finishes that are often confused. Lamination is a solid film bonded to the paper; it gives stronger protection against tearing and rubbing and makes the paper more durable. Varnish is a liquid coating applied and then dried; it offers thinner protection but can be applied to the whole surface or just selected areas.

In practice, the two are often combined: matt or soft-touch thermal lamination over the whole surface, then spot UV varnish on specific areas such as the logo. This brings protection and visual emphasis together in one product.

Get a quote for laminated work

At Kelebek Digital Center we can help you choose between matt, gloss and soft-touch thermal lamination for business cards, brochures, catalogue covers and menus. See our thermal lamination service page for details, and fill in our quote form for your business cards or other jobs.

Frequently asked questions

Does thermal lamination make a print waterproof?

Lamination protects the surface from moisture and spills and makes it wipeable. However, it can absorb moisture at the edges, so it is not fully waterproof.

What is the difference between matt and soft-touch lamination?

Both give a glare-free look. Soft-touch lamination also has a velvety feel and creates a more premium impression.

Can I write on a laminated business card?

Most pens write poorly on laminated surfaces or smudge easily. If one side is for notes, leaving it unlaminated is more practical.

Can a laminated brochure be folded?

Yes, but heavier papers must be creased before folding. Without creasing, the fold line can crack or the film can lift.