Closed now · Summer ⁦08:00–18:00⁩ · Winter ⁦08:00–17:00⁩ 0242 322 15 77 [email protected]
Print Guide

CMYK vs RGB: Why Colours Look Different in Print Than on Screen

Why a colour that looks vivid on screen prints duller, what CMYK and RGB actually mean, and how to avoid unwelcome colour surprises in print.

The difference between CMYK and RGB comes down to how colour is made: screens create colour by emitting light (RGB), while printing presses create it by laying ink on paper (CMYK). The range of colours you can make with light is wider than with ink, so some colours that look bright on screen come out flatter and duller in print. Preparing your file in the right colour mode from the start keeps this difference largely under control.

What is RGB? Colour made with light

RGB creates colour by mixing red, green and blue light in different proportions. All three at full strength make white; no light at all makes black. That's why RGB is called an “additive” colour model.

Your phone, computer monitor, TVs and LED screens all work in RGB. Websites, social media graphics and digital presentations are created in it too, and cameras and phones save images in RGB by default.

What is CMYK? Colour made with ink

CMYK builds colour by printing cyan, magenta, yellow and black (Key) inks on top of each other. Ink absorbs part of the light reflected from white paper, so CMYK is a “subtractive” model: the more ink, the darker the colour.

Most brochures, business cards, catalogues, labels, posters and large-format prints are printed in CMYK. Every colour on the paper is formed by tiny dots of these four inks placed side by side and on top of one another.

Why does the screen colour look different in print?

1. Colour gamut

The range of colours a model can produce is called its “gamut”. RGB's gamut is wider than CMYK's. Neon greens, electric blues, bright oranges and fluorescent pinks in particular can't be reproduced exactly in CMYK. When an RGB file goes to print, these colours are converted to their nearest CMYK equivalent and usually look duller.

2. Screen settings

Every screen has different brightness, contrast and colour temperature. The same file can look different on your phone, your laptop and your designer's monitor. An uncalibrated screen gives no reliable idea of the printed result.

3. Paper and finish

The same CMYK values look vivid on gloss coated paper, darker and softer on uncoated paper, and noticeably darker on kraft. Matt lamination dulls colours slightly, while gloss lamination increases saturation.

4. Lighting

A printed piece is perceived according to the light around it. The same menu can look different in daylight, under warm restaurant lighting and under white office lamps. A screen produces its own light, so it's much less affected.

CMYK vs RGB at a glance

FeatureRGBCMYK
How colour is madeLight (additive)Ink (subtractive)
Used forScreens, web, social media, videoOffset, digital and large-format printing
GamutWiderNarrower
WhiteAll three lights at full strengthThe colour of the paper itself
Typical filesPNG, JPG (for web)PDF, AI, EPS, TIFF (for print)

Practical steps to avoid colour surprises

  • Design in CMYK from the start: if you're designing for print, set up the document in CMYK so what you see on screen is closer to the printable range.
  • Use the right colour profile: ask your printer which CMYK profile they recommend. The profile determines how the conversion is done.
  • Convert photos in a controlled way: convert RGB photos to CMYK in an image editor before printing and check the colour by eye, adjusting saturation and brightness if needed.
  • Set black text in a single black: use 100% K only for small text. If fine text built from all four colours is slightly misregistered, coloured fringes appear around the letters.
  • Use rich black for large black areas: a large background printed in K alone can look grey. Adding some C, M and Y under the K gives a deeper black. Very high total ink coverage can cause drying problems, so ask your printer for their recommended values.
  • Ask for a proof: if colour is critical, seeing a printed proof before the full run is the most reliable approach.

When do brand colours need Pantone?

Pantone is a matching system of standardised, numbered special colours. In offset printing, a Pantone colour can be printed with an ink mixed specifically for that colour rather than built from CMYK. That keeps a logo colour more consistent across different jobs and over time.

Not every Pantone colour has an identical-looking CMYK equivalent; some vivid shades fall outside the CMYK gamut. In digital printing, Pantone colours are usually approximated in CMYK. So when building a brand identity, it's good practice to define your logo colours in Pantone, CMYK, RGB and HEX. This is one of the basic steps of brand identity design.

Common colour mistakes

Knowing the theory isn't enough on its own; the colour problems we see most often in pre-press checks fall into a few groups.

  • Downloading the logo from your website: a website logo is usually low-resolution and RGB. Print needs the original vector file (AI, EPS, PDF or SVG).
  • Defining the same colour with different values: if your brand blue is set to one CMYK value in one place and a slightly different one elsewhere, you'll see two blues in print. Saving colours as swatches in your design software solves this.
  • Very light tints: tints below about 5% can almost disappear on some papers. Choose background tints that are a little stronger.
  • Greys built from four colours: greys mixed from CMY can drift slightly red or green in print. For a neutral grey, defining it as a percentage of K alone is more predictable.

Prepare separate files for web and print

If you'll use the same visual on Instagram and in a brochure, don't rely on one file. Prepare an RGB version at screen resolution for the web, and a separate CMYK version at 300 dpi with 3 mm bleed for print. Using a CMYK file online can also cause trouble, as some browsers and platforms display CMYK images with the wrong colours.

Tourism businesses in Antalya often run the same campaign on digital screens and on printed menus, posters and large-format prints. Producing each output in the right colour model keeps your brand consistent everywhere.

Get help preparing your files for print

At Kelebek Digital Center, every file you send is checked before printing and presented to you for approval as a digital proof. For accurate brand colours in print, defining your logo colours or adapting existing files for print, you can use our graphic design service and request a quote with your file attached.

Frequently asked questions

What happens if I send an RGB file for printing?

The file is converted to CMYK before printing, and vivid colours outside the CMYK range are pulled to their nearest equivalent. Neon and bright shades in particular may look duller than on screen.

What colour values should I use for black text?

For small text, 100% K alone is safest. For large black backgrounds, the rich black value recommended by your printer gives a deeper result.

What is the difference between Pantone and CMYK?

CMYK builds colours by mixing four inks, while Pantone is a standardised system printed with a single specially mixed ink. Pantone helps brand colours stay more consistent across different jobs.

Will the colour on my phone match the print?

You should not expect an exact match; screen settings, paper and finish all affect the result. If colour is critical, seeing a proof before the full run is the most reliable approach.