Closed now · Summer ⁦08:00–18:00⁩ · Winter ⁦08:00–17:00⁩ 0242 322 15 77 [email protected]
Antalya

Trade Fair Stands and Promotional Materials for Events in Antalya

A practical guide to choosing roll-ups, pop-up stands, banners and printed materials for trade fairs, congresses and events in Antalya.

An effective trade fair or event stand usually needs just three layers: a pop-up stand or banner at the back to draw visitors from a distance, one or two roll-ups at the front repeating your message, and brochures, business cards and promotional items on the table. When choosing your stand materials, the size of your space, the organiser's rules and how many times the kit will be transported and set up are the deciding factors.

Start with the organiser's rules

In Antalya, fairs and congresses take place both in exhibition centres and in the conference halls of large hotels. Each event has its own technical regulations. Before ordering anything, find out:

  • the exact stand dimensions (width, depth) and maximum height,
  • whether you can hang anything from walls, floor or ceiling,
  • build-up and breakdown times,
  • whether a fire-retardant certificate is required (especially for fabric and banner materials),
  • whether a power connection is provided.

At fairs using shell-scheme booths, the organiser supplies the sizes for the back and side panel graphics. Vinyl or banner prints are produced to those sizes and applied to the panels.

Roll-up or pop-up stand: what does each do?

FeatureRoll-upPop-up stand
LookA single vertical panelA wide straight or curved back wall
Common sizes85×200 cm, 100×200 cm, 120×200 cmBy number of modules (e.g. 3×3, 4×3)
Set-upOne person, a few secondsOne person can do it, takes a little longer
TransportEasy in its light carry bagWheeled bag or case
Best forEntrances, beside a table, lobbies, shopfrontsBack wall of a fair stand, press backdrop

For a small space (say 2×2 m), one or two roll-ups may be enough. For 3×3 m and above, a pop-up back wall with a roll-up and branded counter at the front gives a more complete look.

Design: it has to read from a distance

Visitors walking down a fair aisle decide in a few seconds. Design for that.

  • Top section: logo and a one-line key message above eye level; tables and visitors hide the bottom.
  • Bottom section: the lowest 30–40 cm of a roll-up is often behind a table or people, so keep important information out of it.
  • Little text: details belong in the brochure; 3–4 short bullet points on the panel are enough.
  • International visitors: tourism, healthcare and real estate fairs in Antalya can draw an international crowd. Give the main message in English and your target market's language, and split brochures by language.
  • QR code: a QR code to your website, catalogue or WhatsApp line makes it easy for visitors to take the information with them.

Materials and print options

Roll-up graphics

Roll-up graphics usually use curl-resistant, light-blocking (blockout) PVC or polyester-based materials. A blockout base stops spotlights behind the stand from washing out the print. A good cassette can be used at many events; over time only the graphic needs replacing.

Pop-up stand graphics

Pop-up stands commonly use tension fabric (textile) prints. Fabric doesn't crease, folds for transport and doesn't reflect under lights. There are also systems that attach to the frame with Velcro or magnetic strips.

Banners and large-format prints

For outdoor events, festivals and concerts, banner material is the usual choice for large visuals. In windy spots, perforated mesh banner reduces wind load, protecting both the print and the structure. At outdoor summer events in Antalya, also bear in mind that thin plastic materials can heat up and ripple in the sun.

What to have on the table

  • Brochures or catalogues: 115–170 gsm coated paper is a common choice for flyers and brochures; product catalogues usually get a heavier, laminated cover.
  • Business cards: you'll hand out a lot at a fair, so bring plenty printed on 300–350 gsm board.
  • Promotional items: branded pens, tote bags, notebooks or key rings help visitors remember you after the event.
  • Table cover: a branded table cover or printed counter hides the boxes and bags underneath.

Artwork and timing

File rules for large-format printing differ slightly from small-format work:

  • Artwork can be prepared at full size or to scale (e.g. 1:10); always tell the printer which scale you used.
  • For large prints viewed from a distance, 100–150 dpi at full size is usually enough; photos must be large enough to achieve this.
  • Logos and text should be vector, with fonts converted to outlines.
  • For roll-ups, allow for the section hidden in the cassette and the side margins; ask the printer for the correct template.

Turnaround depends on the product and quantity; share your event date at quote stage and we'll confirm a clear timeline. During busy fair periods, leave time for design and revisions too.

Materials for follow-up after the fair

The real value of a fair lies in the contact you make with visitors afterwards. A short contact form, a business card drop box or a QR-coded sign-up page on the table makes this easier. A fair-specific campaign code on your brochures lets you identify enquiries that came from the event.

Leftover brochures and catalogues can be used at the office, showroom or next fair. Putting fair-specific dates and hall numbers on a separate insert card or sticker, rather than in the brochure itself, stops leftover stock going to waste.

Outdoor events in Antalya conditions

Outdoor events are possible in Antalya for much of the year, but materials must be ready for sun, wind and sudden rain. Roll-ups and pop-up stands are essentially indoor products and blow over easily outside. Outdoors, flag poles with water- or sand-filled bases, banner frames and panels with sturdy supports are safer.

For beach and seafront events, choose materials with good UV resistance, as prints will be in direct sun all day, so your graphics still look vivid at the end.

Set-up and transport tips

  • Set the stand up once at the office before the fair; you'll catch missing parts and panels fitted the wrong way round early.
  • Bring tape, scissors, spare Velcro, an extension cable and a cleaning cloth.
  • After the event, pack graphics clean and dry; fabric prints folded while damp can develop mould and marks.

Let's prepare for your fair together

Kelebek Digital Center produces pop-up and roll-up stands, large-format prints and promotional products for fairs, congresses and events in Antalya, with a digital proof for your approval before every print. See also our page for events and exhibitions. Send your stand size, event date and wish list through our quote form and we'll suggest a suitable package and confirm the turnaround.

Frequently asked questions

What do I need for a 3×3 metre fair stand?

A pop-up stand as the back wall, a roll-up at the front and a branded counter or table cover give a balanced set-up. Brochures, business cards and promotional items on the table complete it.

Can a roll-up cassette be reused?

Yes, a sturdy cassette can be used at many events. When your message changes, you only need to replace the graphic.

What resolution do large-format prints need?

For large prints viewed from a distance, 100–150 dpi at full size is usually enough. Prints that will be viewed up close need a higher resolution.